Features

• Single channel stand-alone media converter.
• 10/100BASE–T to 100BASE–FX media conversion.
• Auto MDI–I/MDI–Xcopper Ethernet port.
• DIP switch configuration for copper Ethernet port.
• SC connector for 100BASE–FX fiber port.
• Link, Activity&Speed LED indications.
• Supports Multimode, Single mode&Single fiber.
• Long haul transmission upto 100 kms support.
• LFP (Link Fault Pass through) allows the fiber failure to be propagated to the copper port.
  

Application

For more information, download the Data Sheet

FCAT01-J

Features

• Single channel Fast Ethernet media converter.
• Transparent media conversion (copper to fiber).
• Auto negotiating 10/100Mbps copper port (UTP).
• DIP switch to configure Speed & Mode on copper port.
• Manual MDI-II & MDI-X configuration (DIP switch).
• Standard SC connector for 100BaseFX.
• LED indications for Link, Speed and Activity.
• Supports Multimode, Single mode & Single fiber.
• Supports transmission distance of upto100Kms.
• Complies with IEEE 802.3u protocol.
• Far- end fault detection with LFP (Link Fault Propagation).
• Dying gasp feature, complying TS1000 OAM.

Application

For more information, download the Data Sheet

FCAT-1000N

Features

• Single channel stand-alone media converter
• Media Conversion from 1000BASE-T to 1000BASE-X
• Link & Activity, FEF (Far End Fault), LFP(Link Fault Propagation) LED indicators for ease of troubleshooting
• Multi mode or Single mode fiber options
• Internal auto-ranging AC or DC power supply

Application

For more information, download the Data Sheet

FCAT-1000M

Features

• Single channel stand-alone Gigabit Media Converter
• 1 * 10/100/1000Base-T & 1*1000Base-X ports
• Jumbo Frame & Flow Control support
• Dying gasp alarm generation/clear (IEEE 802.3ah)
• In Band & Out of Band Management support with CLI, TELNET, Web Browser & LITEVIEW NMS
• Multimode, Single mode & Single fiber options

Application

For more information, download the Data Sheet

FCAT-1000J

Features

• Dual channel stand-alone managed Gigabit Media Converter
• Complies to IEEE standard specification
• 1 or 2 nos - 10/100/1000Mbps Copper ports
• 1 or 2 nos - 1000Base-X Gigabit Fiber ports
• Jumbo Frame support
• Complies to IEEE 802.3ah OAM
• Dying gasp alarm generation/clear (IEEE 802.3ah)
• 1 - 10/100 Mbps port for Out-of-Band management
• Supports Multimode, Single mode & Single fiber
• SNMP & LITEVIEW NMS support

Application

For more information, download the Data Sheet

FCAT-100M

Features

• Single channel stand-alone Fast Ethernet Media
  Converter
• 1 no 10/100 Mbps Copper ports complying to IEEE 802.3 and 802.x standards
• 1 no 100Base-X Fiber port
• Auto-negotiating for Fast Ethernet copper port
• Supports flow control
• Jumbo frame Enable/Disable per Port - upto 9000 bytes
• In-band Management
• RJ 45 and SC Fiber connectors
• Half 19” size
• Supports both MMF, SMF & SF optical requirements
• Transparent pass through for non-tagged and Tagged Data Traffic.
• DHCP Client RFC Support for acquiring IP address for Management or Static IP address assignment.
• Transparent Pass through(Enable/Disable) option for Flow Control
• Link Fault Propagation

Application

For more information, download the Data Sheet

OAK-10

Features

• 3U, 19” Managed Gigabit Media converter Chassis
• 10 Line cards, 2 Management modules
• Two power supply modules for redundancy
• Line cards with two 10/100/1000Mbps Media converters
• Complies to IEEE 802.3ah OAM
• Maximum of 20 Gig media conversions from single rack
• SC fiber interfaces on I/O modules
• Management through console, Telnet, SNMP v2/v3 Agent
• LITEVIEW Manager – NMS for centralized management

Application

For more information, download the Data Sheet

OAK-13

Features

• 3U High, 19” Rack Mountable Unmanaged Fast / Gigabit Media converter Chassis
• 13 IO slots to populate Fast Ethernet & Gigabit Ethernet line cards
• Two power supply modules for redundancy
• Line cards with
  • Two 10/100/1000Mbps (GE) Media converters
  • Two 10/100Mbps (Fast Ethernet) media converter
• Maximum of 26 Gig media conversions from single rack
• SC / SFF (LC) fiber interfaces on IO modules

Application

For more information, download the Data Sheet

IVY2424

Features

• Transparent media conversion from
• Copper (10/100BASE-T) to Fiber (100BASE-X)
• 24 nos 10/100BASE-T and 24 nos 100BASE-X ports
• Auto MDI-I/MDI-X support on all 10/100BASE-T ports
• Supports Multimode, Single mode & Single
• Long haul transmission support upto 100 Km
• SFF or SFP fiber connector
• LFP (Link Fault Pass-through) allows fiber failure
• propagation on to copper ports
• Remote configuration of CPE (10/100 BASE-T ports)
• 24 nos 10/100BASE-T and 24 nos 100BASE-X ports

Application

For more information, download the Data Sheet

IVY01

Features

• Stand-alone single-channel Ethernet media converter
• 10/100BASE-T to 100BASE-X transparent conversion
• Auto-MDI-I/MDI-X and auto negotiating port
• SC (Standard) / LC (option) connectors for 100BASE-X
• LED indications for Link, Speed and Activity
• MMF and SMF cable connects
• Dual core (standard) & Single core fiber options
• Supports transmission distance of upto100Kms
• DIP switches to configure speed and mode on
• Ethernet copper port
• Complies IEEE 802.3u standard protocols
• Far-end fault detection with Link Fault Propagation
• Ethernet OAM with TS1000 compliance(Remotely managed, Dying gasp)
• Optics for various distances

Application

For more information, download the Data Sheet