Description

OAK13/2GE (FCAT1000-N/R) is a dual channel Gigabit Ethernet Media converter module with SC connectors and is available with a versatile range of Fiber Optic interfaces.

FCAT1000-N/R

Specifications

  •    Standards Compliance :
       IEEE 802.3ab, IEEE 802.3z, 10/100/1000Base-T, 1000Base-X
  •   Copper port : 2 nos
       RJ-45
        Full Duplex support
        Auto MDI-I / MDI-X
       Fiber port (1000Base-X) : 2 nos
        SC Connector
  •    LED Indicators:
        PWR (Yellow) : Power status
       Fx1, Fx2 ports :
       LNK (Green) (Ch-1, Ch-2) : Link/Activity of fiber port 1,2
        ACT(Green) (Ch-1, Ch-2) : Activity of fiber port 1,2
       LPF (Red) (Ch-1, Ch-2) : LPF indication for fiber port 1,2
       FEF (Yellow) (Ch-1, Ch-2) : FEF indication for fiber port 1,2
       Tx1, Tx2 ports :
       LNK (Green) (Ch-1, Ch-2) : Link/Activity of fiber port 1,2
       LPF (Red) (Ch-1, Ch-2) : LPF indication for fiber port 1,2
       FEF (Yellow) (Ch-1, Ch-2) : FEF indication for fiber port 1,2
  •   On-card Jumper settings
       Enable / Disable of :
       Link Fault Propagation LFP (Ch-1, Ch-2) and
       Auto Negotiation AN (Ch-1, Ch-2)
  •   Power :
       Power consumption : 4.5W (one line card)
       Power consumption : 60W (Fully loaded OAK-13 chassis)
  •   Environment
       Operating Temperature :   0°– 50°C
       Humidity :   10% to 90%, non-condensing
       Physical Dimensions :   129 X 25 X 122 (mm)

ORDERING OPTION

OAK13/2GE/#/SC Dual channel Gigabit Ethernet Media converter module with SC connectors
# MM for MM fiber 0.5 Km
SM15, SM40, SM60 for SC fiber 15 / 40 / 60 Km
SF15 (1310Tx / 1550Rx), SF40 (1310Tx / 1550Rx), SF70 (1490Tx / 1550Rx) for SM fiber 15 / 40 / 70 Km