S-Lavender

lavender

Managed 10G Switches

Overview

LAVENDER SERIES-Fully Managed Layer 3 Lite Stackable Switch

Elevate your network's performance, reliability and scalability with our state-of-the-art Fully Managed Layer 3 lite Stackable Switch. Designed for modern enterprises, this switch delivers exceptional features, robust security and unparalleled manageability making it the perfect solution for your networking needs.

Key Features

High Performance

Boasting a high switching capacity and fast throughput, our LAVENDER switch ensures seamless data transmission and optimal network efficiency.

Scalability

With stackable architecture, you can easily expand your network by adding more switches without compromising performance or manageability.
Stack up to 4 units to create a single, unified network with centralized control

Advanced Security

Protect your network with robust security features including 802.1X authentication, VLAN segmentation, access control lists (ACLs) and more.
Safeguard sensitive data and prevent unauthorized access.

Intuitive Management

Benefit from a user-friendly interface and advanced management tools.
Whether through an intuitive web-based GUI, CLI, or SNMP, you can effortlessly configure, monitor and troubleshoot your network.

Power over Ethernet (PoE)

Support for PoE/PoE+ enables the switch to power connected devices like IP cameras, wireless access points and VoIP phones.
Reducing the need for additional power sources and simplifying your network deployment.

Quality of Service (QoS)

Ensure the highest priority for critical applications with advanced QoS features, including traffic shaping and prioritization.
Deliver consistent performance for voice, video and data services.

Energy Efficiency

Built with energy-efficient technology, our switch helps reduce power consumption without compromising performance, making it an eco-friendly choice for your organization.

Reliability and Redundancy

Enjoy enhanced reliability with features such as link aggregation, spanning tree protocol (STP), and redundant power supplies.
Minimize downtime and ensure continuous network availability.

enquiry

LAVENDER-244X

24 port 10/100/1000 Gbe-T Fully managed Layer 2+ Stackable Switch with 4 10G SFP+ Ports

specifications

Interface

Features 24x10/100/1000 Mbps non-PoE ports and 4x1/10G SFP ports, offering a switching capacity of 128 Gbps and a forwarding rate of 95.3 MPPS. Uplink ports support stacking.

Layer 3 Features

Supports Static Route for network connectivity.
Supports Dynamic routing protocols such as RIP and OSPF which are utilized in campus and enterprise networks.

Layer 2 Features

Supports a 16K MAC table with both static and dynamic MAC addresses, along with MAC address VLAN binding.
IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave, LACP for Link Aggregation.
4K VLAN, QinQ, Private VLAN.
ERPS for Ring Architecture.
ACL with based on policy control with VLAN IDs, source MAC/IP addresses and protocol port.
802.1D(STP), 802.1W(RSTP), 802.1S (MSTP), BPDU, root guard.

Management

Console
Telnet, SSH2.0
WEB GUI
SNMP v1/v2/v3 ,TFTP & RMON

Security

Storm-control-Broadcast/multicast/ unicast.
Port isolation, Port security.
IP Source Guard and IP MAC port binding.
Authentication-IEEE 802.1x, RADIUS & TACACS+.

QOS

Flow classification based on L2/L3/L4 protocols.
802.1P/DSCP
SP, WRR and SP+WRR
Congestion avoidance with Tail-Drop and WRED

LAVENDER-244XP

enquiry

24 port 10/100/1000 Gbe-T Fully managed Layer 2+ PoE Stackable Switch with 4 10G SFP+ Ports

specifications

Interface

Features 24x10/100/1000 Mbps PoE ports and 4x1/10G SFP ports, offering a switching capacity of 128 Gbps and a forwarding rate of 95.3 MPPS. Uplink ports support stacking.

Layer 3 Features

Supports Static Route for network connectivity.
Supports Dynamic routing protocols such as RIP and OSPF which are utilized in campus and enterprise networks.

Layer 2 Features

Supports a 16K MAC table with both static and dynamic MAC addresses, along with MAC address VLAN binding.
IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave. LACP for Link Aggregation.
4K VLAN, QinQ, Private VLAN.
ERPS for Ring Architecture.
ACL with based on policy control with VLAN IDs, source MAC/IP addresses and protocol port.
IEEE 803.af (POE) and IEEE 803.at (POE+)
Stacking-Multiple Switches are combined to form a virtual switch logically.
802.1D(STP), 802.1W(RSTP), 802.1S (MSTP), BPDU, root guard.

Management

Console
Telnet, SSH2.0
WEB GUI
SNMP v1/v2/v3 TFTP & RMON

Security

Storm-control-Broadcast/multicast/unicast.
Port isolation, Port security.
IP Source Guard and IP MAC port binding.
Authentication-IEEE 802.1x, RADIUS & TACACS+.

QOS

Flow classification based on L2/L3/L4 protocols.
802.1P/DSCP
SP, WRR and SP+WRR
Congestion avoidance with Tail-Drop and WRED

LAVENDER-24F4X

enquiry

24 port 1 Gb SFP Fully managed Layer 2+ Stackable Switch with 4 10G SFP+ Ports

specifications

Interface

Features 24x10/100/1000 Mbps non-PoE ports and 4x1/10G SFP ports, offering a switching capacity of 128 Gbps and a forwarding rate of 95.3 MPPS. Uplink ports support stacking.

Layer 3 Features

Supports Static Route for network connectivity.
Supports Dynamic routing protocols such as RIP and OSPF which are utilized in campus and enterprise networks.

Layer 2 Features

Supports a 16K MAC table with both static and dynamic MAC addresses, along with MAC address VLAN binding.
IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave. LACP for Link Aggregation.
4K VLAN, QinQ, Private VLAN.
ERPS for Ring Architecture.
ACL with based on policy control with VLAN IDs, source MAC/IP addresses and protocol port.

Management

Console
Telnet, SSH2.0
WEB GUI
SNMP v1/v2/v3 TFTP & RMON

Security

Storm-control-Broadcast/multicast/unicast.
Port isolation, Port security.
IP Source Guard and IP MAC port binding.
Authentication-IEEE 802.1x, RADIUS & TACACS+.

QOS

Flow classification based on L2/L3/L4 protocols.
802.1P/DSCP
SP, WRR and SP+WRR
Congestion avoidance with Tail-Drop and WRED

LAVENDER-84X

enquiry

Managed 10 Gig Ethernet Switch 08 Port 10/100/1000 Gbe with 4 x 10G (SFP+), AC

specifications

Interface

Features 8x10/100/1000 Mbps non-PoE ports and 4x1/10G SFP ports, offering a switching capacity of 128 Gbps and a forwarding rate of 95.3 MPPS. Uplink ports support stacking.

Layer 3 Features

Supports Static Route for network connectivity.
Supports Dynamic routing protocols such as RIP and OSPF which are utilized in campus and enterprise networks.

Layer 2 Features

Supports a 16K MAC table with both static and dynamic MAC addresses, along with MAC address VLAN binding.
IGMP v1/v2/v3, IGMP Snooping, IGMP Fast Leave. LACP for Link Aggregation.
4K VLAN, QinQ, Private VLAN.
ERPS for Ring Architecture.
ACL with based on policy control with VLAN IDs, source MAC/IP addresses and protocol port.

Management

Console
Telnet, SSH2.0
WEB GUI
SNMP v1/v2/v3 TFTP & RMON

Security

Storm-control-Broadcast/multicast/unicast.
Port isolation, Port security.
IP Source Guard and IP MAC port binding.
Authentication-IEEE 802.1x, RADIUS & TACACS+.

QOS

Flow classification based on L2/L3/L4 protocols.
802.1P/DSCP
SP, WRR and SP+WRR
Congestion avoidance with Tail-Drop and WRED

laven​der

LAVENDER-244X

LAVENDER-244XP

LAVENDER-24F4X

LAVENDER-84X

LAVENDER-244X

specifications

Interface

Layer 3 Features

Layer 2 Features

Management

Security

QOS

specifications

Interface

Layer 3 Features

Layer 2 Features

Management

Security

QOS

LAVENDER-24F4X

Interface

Layer 3 Features

Layer 2 Features

Management

Security

QOS

specifications

Interface

Layer 3 Features

Layer 2 Features

Management

Security

QOS

lavender