PINE-1(v3)PINE-1 is an E1 inverse multiplexer enabling the transport of high speed data broadband services over the E1 links. Using G.704 and G.8040 standard to convert Ethernet to multiple E1 by GFP format mapping
10/100Base-TX or Fiber LAN user interfaces makes ideal solution for high speed broadband application. The inverse aggregation bandwidth is scalable as Nx64kbps [the maximum N=31] with maximum payload bandwidth at 1.984Mbps.
Device can be managed locally by connecting a Console port or remotely through Telnet/SNMP access all on front panel of the unit. Administration, Maintenance, and Provisioning (OAM&P) are provisioned with the use of 16Kbps embedded operation channel (EOC) that runs through the inverse link. Devices are configured with individual IP address for local and remote management



  •    Inverse multiplexing:
       Maximal delay : 64 ms[512 frame buffer]
       Data rate : Nx64kbps, [the maximum N=31], 16Kbps EOC channel is embedded in SA4-SA6 spare bits.
  •   Performance :
      Switching fabric 0.832~1Gbps
  •    Capacity :
        32MB SDRAM, 8MB flash, 128KB Switch Buffer
  •   LAN Interface
       Standard : IEEE 802.3 / IEEE 802.3u
        Interface : IEEE 802.3/802.3u 10/100/1000M Base-T
       Data Rate : N x64K bps[N=1~31]
       Bridging Complied with IEEE 802.1d transparent bridge
       Capability:Supports VLAN ID, Q in Q and up to 2048 MAC addresses learning
       Connector Type: RJ45, 4 ports
       Ethernet packet Maximum packet size up to 9K jumbo frame
  •    E1 Interface :
       Standard : ITU-T G.703, G.704,
       No. of E1 output : 1,scaled down automatically per E1 alarms
       Line rate : 2048 Kbps +/- 50 PPM
       Clock Mode Internal, Recovery
       Line Code : HDB3
       Framing : PCM31,PCM31C,PCM30 ,PCM30C
       Pulse shape : Meet ITU-T G.703
       Impedance : Balanced 120Ω+/-5% resistive
       Connection Type : RJ-45
  •   Diagnostics :
       Loopback: LL,RL and NL(local payload loopback)
  •   Power supply :
       AC / DC / AC+DC
        AC: 90 - 260 V @ 50-60 Hz, 0.2A
        DC: -36~ -72 V
  •   Environment
       Operating Temperature : 0°– 55°C
       Humidity : 10% to 90%, non-condensing
       Storage Temperature : -25~70-deg centigrade
       Physical Dimensions :192*172*44mm


PINE-1(V3) Managed Ethernet over E1 device with 1 E1 port, 4 Ethernet ports & AC & DC power.