Description

SHDSL (Single-pair High-bit-rate Digital Subscriber Line) Router, provides a broadband transmission with bandwidth up to 5.696Mbps (15Mbps for PAM128) over a single pair of copper wires for LAN connection between two local area networks.
PIXIE(v2) conforms to ITU-T G.991.2, the GSHDSL requirements. 1 / 2 pair of PIXIE(v2) offers a cost effective symmetrical broadband solution for bandwidth-hungry applications such as LAN-to-LAN connection, Internet

PIXIE(V3)

Specifications

  •   G.SHDSL Specification
       Fully compliant with standards of ETSI (SHDSL, SHDSL.bis)
       ITU (G.SHDSL, G.SHDSL.bis, g.998.2/g.bond) and IEEE (EFM)
       Line Code: TC-PAM 16/32/64/128
       M-pair mode for 1/2 pairs
       ITU G.991.2 Annex A ,B
       STU-C/STU-R mode selectable
       Impedance: 135 ohm
       SNR /Attenuation Value calculation .
  •    Physical interfaces
       4 ports RJ45 for 10/100Mbs Ethernet LAN connection
        RJ-45 ports for G.SHDSL connection
       1 console port for local configuration and management
  •    ATM Protocol
       ATM adaptation layer type 5 (AAL5)
        VC multiplexing and LLC encapsulation
       Multi-protocol over AAL5 (RFC 1483 bridged PDU)
       Support 5 PVCs
  •    Bridging
       IEEE 802.1D transparent learning bridge
       Up to 1K MAC learning addresses
  •   Routing Capability
        Support IP/TCP/UDP/ARP/ICMP protocols
        IP routing with static routing and RIPv1/RIPv2 (RFC1058/2453)
  •    Configuration
       Local console
       Telnet access
       Web-based GUI
  •    Network Management
       Web-based GUI for express setup, configuration and management
       CLI interface for local console and Telnet access
       Password protected management
       Software upgrade via HTTP
  •   Power
       AC 90~260Vac(47~63Hz), DC -36 ~ -72 Vdc. AC+DC
  •   Environment
      Operating Temp : 0° to 45°C
      Storage Temp : -10° to 70°C

ORDERING OPTION

PIXIE(v3)-2R 4 – 10/100BaseT, 1-SHDSL(2W), Managed, Power – AC+DC
PIXIE(v3)-4R 4 – 10/100BaseT, 1-SHDSL(4W), Managed, Power – AC+D