Allium Leaf / Spine Switch
DC405-BH — 32× QSFP56-DD 400G ports, 25.6 Tbps switching, for leaf/spine and DCI.
Explore models
Allium Spine Switch
DC405-BD — 32× QSFP28 100G ports, 6.4 Tbps switching, spine switch.
Explore models
Allium TOR / Spine Switch
DC306-BD — 32× QSFP28, 3.2 Tbps switching, deployable as TOR or spine.
Explore models
Allium TOR Switches
DC207-BD/DC207-MF — 48× 25G + 8× 100G, 2 Tbps switching, low-latency Top-of-Rack.
Explore models
Data Center Switches
Allium Leaf / Spine Switch
DC405-BH (Broadcom Tomahawk 4) — 32x QSFP56-DD 400G ports, 25.6 Tbps switching capacity, for leaf/spine and DCI with 400G ZR/OpenZR+ support.
400G Non-Blocking Fabric
25.6 Tbps switching capacity with 5.079 Bpps forwarding at 649 ns latency, wire-speed Layer 2/Layer 3 switching.
L2/L3 Switching
802.3ad LACP, PVSTP, VLAN trunking, and 4K VLANs with line-rate Layer 2/Layer 3 performance.
QoS & Traffic Management
802.1p/DSCP/CoS mapping with WRR, SP+WRR, and WFQ scheduling plus WRED congestion control.
Access Control (ACL)
IPv4/IPv6 ACL match fields — source/destination IP, ToS, DSCP, protocol, TCP/UDP ports, and VLAN — for granular traffic security policy.
New
400G Ports
Allium DC405-BH
32x QSFP56-DD · 25.6 Tbps · Broadcom Tomahawk 4
Data Center Switches
Allium Spine Switch
DC405-BD (Broadcom Trident 4) — 32x QSFP28 100G ports, 6.4 Tbps switching capacity, an open network switch for the spine layer.
100G Non-Blocking Fabric
6.4 Tbps switching capacity with 5.4 Bpps forwarding, wire-speed Layer 2/Layer 3 switching for the spine layer.
L2/L3 Switching
802.3ad LACP, PVSTP, VLAN trunking, and 4K VLANs with line-rate Layer 2/Layer 3 performance.
QoS & Traffic Management
802.1p/DSCP/CoS mapping with WRR, SP+WRR, and WFQ scheduling plus WRED congestion control.
Access Control (ACL)
IPv4/IPv6 ACL match fields — source/destination IP, ToS, DSCP, protocol, TCP/UDP ports, and VLAN — for granular traffic security policy.
Data Center Switches
Allium TOR / Spine Switch
DC306-BD (Broadcom Trident 3) — 32x QSFP28, 3.2 Tbps switching capacity, deployable as TOR or spine switch.
3.2 Tbps Switching Fabric
3.2 Tbps switching capacity with 1.52 Bpps forwarding, wire-speed Layer 2/Layer 3 switching for TOR or spine deployment.
L2/L3 Switching
802.3ad LACP, PVSTP, VLAN trunking, and 4K VLANs with line-rate Layer 2/Layer 3 performance.
QoS & Traffic Management
802.1p/DSCP/CoS mapping with WRR, SP+WRR, and WFQ scheduling plus WRED congestion control.
Access Control (ACL)
IPv4/IPv6 ACL match fields — source/destination IP, ToS, DSCP, protocol, TCP/UDP ports, and VLAN — for granular traffic security policy.
Data Center Switches
Allium TOR Switches
DC207-BD (Broadcom Trident 3) and DC207-MF (Marvell Falcon) — 48x25G + 8x100G low latency Top-of-Rack switches, 2 Tbps switching capacity.
Low-Latency Top-of-Rack
2 Tbps switching capacity with 2 Bpps forwarding across 48x25G + 8x100G ports.
L2/L3 Switching
802.3ad LACP, PVSTP, VLAN trunking, and 4K VLANs with line-rate Layer 2/Layer 3 performance.
QoS & Traffic Management
802.1p/DSCP/CoS mapping with SP, WRR, SP+WRR, and WFQ scheduling, ETS (802.1Qaz), and WRED congestion control.
Policy ACL Security
Global/port/ingress/egress Policy ACL with SIP/DIP match and redirect/forward/drop actions, classified on MAC, IP, DSCP, protocol, and L4 ports.
25G · 100G
Allium DC207-BD
48x SFP28 (25GbE) + 8x QSFP28 (25GbE) · 4 Tbps · Broadcom Trident 3
25G · 100G
Allium DC207-MF
48x SFP28 (25GbE) + 8x QSFP28 (25GbE) · 2 Tbps · Marvell Falcon
Models
New
400G Ports
Allium DC405-BH
Overview
The Allium DC405-BH is a high-performance 400G data center leaf/spine switch designed for cloud-scale and AI-driven networks. Featuring 32 × QSFP56-DD ports, it delivers 25.6 Tbps non-blocking switching capacity with ultra-low latency. Built on an open networking architecture with ONIE, it supports flexible NOS deployment. It is an ideal solution for private/public cloud, HPC, enterprise data centers, and high-speed fabric interconnects.
32x QSFP56-DD
Ports
25.6 Tbps
Switching Capacity
Broadcom Tomahawk 4
Silicon
1500W AC / 1600W DC max
Power
Specifications
- Switching capacity: 25.6 Tbps full duplex
- Forwarding rate: 5.079 Bpps (latency: 649 ns)
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: up to 9416 Bytes
- Packet buffer: 56.83 MB
- Shared TCAM space with the following maximum entries:
- MAC addresses: 8K (exact) / 128K (fuzzy)
- VRF: 8192
- L3 LPM: 4K IPv4 / 2K IPv6 (64b) / 1K IPv6 (128b)
- ALPM: 850K IPv4 / 360K IPv6
- Switch silicon: Broadcom Tomahawk 4
- CPU: 4-core 2.2 GHz
- SPI Flash: 512 MB x2
- Memory: 32 GB DDR4 with ECC
- Storage: 128 GB m.2 SATA SSD with PLP support
- TPM: TPM 2.0
- BMC: AST2600 with OpenBMC (Serial-over-LAN support)
- Timing & sync: 1PPS port, SyncE, IEEE 1588v2 PTP
- e-fuses to protect individual transceivers; standby power mode; selective per-port power-off
- 1x USB 2.0
- 1x RJ-45 console
- 1x RJ-45 GE management
- 2 redundant, load-sharing PSUs — 100-240 VAC or 48V DC
- Max power: 100-127VAC@50-60Hz (12A/1000W max); 200-240VAC@50-60Hz (8A/1500W max); -40 to -75VDC (1600W/40A max)
- Hot-swappable, load-sharing, redundant 1500W AC or 48VDC PSUs
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- BFD for static routes, OSPF v2/v3, BGP4/BGP4+
- VRRP, VRF, NAT
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: WRR, SP+WRR, WFQ
- Congestion control: WRED
- Classification: DSCP; policing, policy map, rate limiting
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote, NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
- Switching capacity: 25.6 Tbps full duplex
- Forwarding rate: 5.079 Bpps (latency: 649 ns)
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: up to 9416 Bytes
- Packet buffer: 56.83 MB
- Shared TCAM space with the following maximum entries:
- MAC addresses: 8K (exact) / 128K (fuzzy)
- VRF: 8192
- L3 LPM: 4K IPv4 / 2K IPv6 (64b) / 1K IPv6 (128b)
- ALPM: 850K IPv4 / 360K IPv6
- Switch silicon: Broadcom Tomahawk 4
- CPU: 4-core 2.2 GHz
- SPI Flash: 512 MB x2
- Memory: 32 GB DDR4 with ECC
- Storage: 128 GB m.2 SATA SSD with PLP support
- TPM: TPM 2.0
- BMC: AST2600 with OpenBMC (Serial-over-LAN support)
- Timing & sync: 1PPS port, SyncE, IEEE 1588v2 PTP
- e-fuses to protect individual transceivers; standby power mode; selective per-port power-off
- 1x USB 2.0
- 1x RJ-45 console
- 1x RJ-45 GE management
- 2 redundant, load-sharing PSUs — 100-240 VAC or 48V DC
- Max power: 100-127VAC@50-60Hz (12A/1000W max); 200-240VAC@50-60Hz (8A/1500W max); -40 to -75VDC (1600W/40A max)
- Hot-swappable, load-sharing, redundant 1500W AC or 48VDC PSUs
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- BFD for static routes, OSPF v2/v3, BGP4/BGP4+
- VRRP, VRF, NAT
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: WRR, SP+WRR, WFQ
- Congestion control: WRED
- Classification: DSCP; policing, policy map, rate limiting
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote, NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
Certifications
Under Process
Under Process
Under Process
Under Process
100G Ports
Allium DC405-BD
Overview
The Allium DC405-BD is a 100G data center spine switch. The switch provides line-rate L2 and L3 switching across the 32 × QSFP28 ports, each supporting 1 × 100 GbE, or via breakout cables 4 × 25 GbE. The DC405-BD can be deployed as a spine switch supporting 25/100 GbE spine interconnects. Built on an open networking architecture with ONIE, it supports flexible NOS deployment. It is an ideal solution for private/public cloud and high-performance data center fabrics.
32x QSFP28
Ports
6.4 Tbps
Switching Capacity
Broadcom Trident 4
Silicon
1500W AC max
Power
Specifications
- Switching capability: 6.4 Tbps
- Forwarding rate: 5.4 Bpps
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: support up to 9416 Bytes
- Packet buffer: 132 MB SmartBuffer
- MAC addresses: max. 384K
- Switch silicon: Broadcom Trident 4, 6.4 Tb/s
- CPU: Intel® Pentium® 4-core, 1.5 GHz
- SPI Flash: 32 MB x2
- Memory: 8 GB x2 with ECC support
- Storage: m.2 NVMe SSD 64GB x1 MLC
- 1x USB 3.0
- 1x RJ-45 console
- 1x RJ-45 1000BASE-T management + 2x SFP+ 10G
- 2 redundant, load-sharing, hot-swappable AC PSUs — 100-240 VAC
- Max power: 100-180VAC@50-60Hz (1000W max)*; 200-240VAC@50-60Hz (1500W max)
- *200-240VAC may be required for power redundancy under full loading
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- BFD for static routes, OSPF v2/v3, BGP4/BGP4+
- VRRP, VRF, NAT
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: WRR, SP+WRR, WFQ
- Congestion control: WRED
- Classification: DSCP; policing, policy map, rate limiting
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote, NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
- Switching capability: 6.4 Tbps
- Forwarding rate: 5.4 Bpps
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: support up to 9416 Bytes
- Packet buffer: 132 MB SmartBuffer
- MAC addresses: max. 384K
- Switch silicon: Broadcom Trident 4, 6.4 Tb/s
- CPU: Intel® Pentium® 4-core, 1.5 GHz
- SPI Flash: 32 MB x2
- Memory: 8 GB x2 with ECC support
- Storage: m.2 NVMe SSD 64GB x1 MLC
- 1x USB 3.0
- 1x RJ-45 console
- 1x RJ-45 1000BASE-T management + 2x SFP+ 10G
- 2 redundant, load-sharing, hot-swappable AC PSUs — 100-240 VAC
- Max power: 100-180VAC@50-60Hz (1000W max)*; 200-240VAC@50-60Hz (1500W max)
- *200-240VAC may be required for power redundancy under full loading
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- BFD for static routes, OSPF v2/v3, BGP4/BGP4+
- VRRP, VRF, NAT
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: WRR, SP+WRR, WFQ
- Congestion control: WRED
- Classification: DSCP; policing, policy map, rate limiting
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote, NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
Certifications
Under Process
Under Process
Under Process
Under Process
100G Ports
Allium DC306-BD
Overview
The Allium DC306-BD is a compact 100G Top-of-Rack (ToR) and spine switch designed for high-performance enterprise and cloud data centers. It features 32 × QSFP28 ports supporting 100G, 50G, 40G, 25G, and 10G connectivity with a 3.2 Tbps switching capacity. It is ideal for server aggregation, storage networks, virtualization, and cloud infrastructure.
32x QSFP28
Ports
3.2 Tbps
Switching Capacity
Broadcom Trident 3
Silicon
550W max
Power
Specifications
- Switching capacity: 3.2 Tbps full duplex
- Forwarding rate: 1.52 Bpps
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: up to 9416 Bytes
- Packet buffer: 32 MB integrated packet buffer
- MAC addresses: 32K min / 288K max
- VLAN IDs: 4K
- IPv4: 16K min / 168K max host entries; 32K LPM entries (TCAM-only mode)
- IPv6: 8K min / 100K max host entries; IPv6/128 = 8K (TCAM-only mode)
- Switch silicon: Broadcom Trident 3 (No PHYs)
- CPU: 4-core 2.2 GHz
- Memory: DDR4 8 GB x2
- SPI Flash: 16 MB x2
- Storage: 64 GB MLC m.2 SSD
- 1x USB 2.0
- 1x RJ-45 console
- 1x RJ-45 100/1000BASE-T management + 2x SFP+ 10G
- 2 redundant, load-sharing, hot-swappable AC or -48V DC PSUs
- Input: 100-240 VAC, -36V to -75 VDC
- Max power consumption: 550W
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- BFD for static routes, OSPF v2/v3, BGP4/BGP4+
- VRRP, VRF, NAT
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: WRR, SP+WRR, WFQ
- Congestion control: WRED
- Classification: DSCP; policing, policy map, rate limiting
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote, NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
- Switching capacity: 3.2 Tbps full duplex
- Forwarding rate: 1.52 Bpps
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: up to 9416 Bytes
- Packet buffer: 32 MB integrated packet buffer
- MAC addresses: 32K min / 288K max
- VLAN IDs: 4K
- IPv4: 16K min / 168K max host entries; 32K LPM entries (TCAM-only mode)
- IPv6: 8K min / 100K max host entries; IPv6/128 = 8K (TCAM-only mode)
- Switch silicon: Broadcom Trident 3 (No PHYs)
- CPU: 4-core 2.2 GHz
- Memory: DDR4 8 GB x2
- SPI Flash: 16 MB x2
- Storage: 64 GB MLC m.2 SSD
- 1x USB 2.0
- 1x RJ-45 console
- 1x RJ-45 100/1000BASE-T management + 2x SFP+ 10G
- 2 redundant, load-sharing, hot-swappable AC or -48V DC PSUs
- Input: 100-240 VAC, -36V to -75 VDC
- Max power consumption: 550W
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- BFD for static routes, OSPF v2/v3, BGP4/BGP4+
- VRRP, VRF, NAT
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: WRR, SP+WRR, WFQ
- Congestion control: WRED
- Classification: DSCP; policing, policy map, rate limiting
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote, NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
Certifications
Under Process
Under Process
Under Process
Under Process
25G · 100G
Allium DC207-BD
Overview
The Allium DC207-BD is a high-performance, low-latency Top-of-Rack (ToR) switch designed for modern cloud and enterprise data centers. It features 48 × 25G SFP28 ports and 8 × 100G QSFP28 uplink ports, delivering 4 Tbps non-blocking switching capacity for high-speed server connectivity. Built on an open networking architecture with ONIE, it supports flexible NOS deployment, ideal for private cloud, virtualization, HPC, and data center fabric deployments.
48x SFP28 (25GbE) + 8x QSFP28 (25GbE)
Ports
4 Tbps
Switching Capacity
Broadcom Trident 3
Silicon
1RU
Form Factor
Specifications
- Switching capacity: 4 Tbps full duplex
- Forwarding rate: 2 Bpps
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: up to 9K Bytes
- Packet buffer: 32 MB integrated packet buffer
- MAC addresses: 32K min / 288K max
- VLAN IDs: 4K
- IPv4: 16K min / 168K max host entries; 32K LPM entries (TCAM-only mode)
- IPv6: 8K min / 100K max host entries; IPv6/128 = 8K (TCAM-only mode)
- Switch silicon: Broadcom Trident 3 (No PHYs)
- CPU: 4-core 2.2 GHz
- Memory: SO-DIMM DDR4 8 GB x2
- SPI Flash: 16 MB x2
- Storage: 64 GB MLC m.2 SSD
- 1x USB 2.0
- 1x RJ-45 serial console
- 1x RJ-45 100/1000BASE-T management
- 2 redundant, load-sharing, hot-swappable AC or -48V DC PSUs
- AC input range: 100-240 VAC; DC input range: -36 to -72 VDC
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- IPv4/IPv6 default & static routes, null routes, route preference & redistribution
- OSPF v2/v3 with graceful restart, passive, stub/NSSA, MD5 auth
- BGP4/BGP4+ with MD5 auth, graceful restart, unnumbered
- BFD for static routes, RIP, OSPFv2/v3, RIPng, iBGP
- VRRP, NAT, VRF
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: SP, WRR, SP+WRR, WFQ
- ETS (802.1Qaz), congestion control (WRED), bandwidth control
- Classification: MAC, IP, DSCP, protocol, L4 ports, IPv6 traffic class/flow label
- Policing, policy map, rate limiting
- Policy ACL: global/port/ingress/egress, SIP/DIP match, redirect/forward/drop actions
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH; config replace/reload
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote (7 severity levels), NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG, port breakout, management VRF, interface & drop counters
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
- Switching capacity: 4 Tbps full duplex
- Forwarding rate: 2 Bpps
- Layer 2 / Layer 3 line-rate switching
- Jumbo frames: up to 9K Bytes
- Packet buffer: 32 MB integrated packet buffer
- MAC addresses: 32K min / 288K max
- VLAN IDs: 4K
- IPv4: 16K min / 168K max host entries; 32K LPM entries (TCAM-only mode)
- IPv6: 8K min / 100K max host entries; IPv6/128 = 8K (TCAM-only mode)
- Switch silicon: Broadcom Trident 3 (No PHYs)
- CPU: 4-core 2.2 GHz
- Memory: SO-DIMM DDR4 8 GB x2
- SPI Flash: 16 MB x2
- Storage: 64 GB MLC m.2 SSD
- 1x USB 2.0
- 1x RJ-45 serial console
- 1x RJ-45 100/1000BASE-T management
- 2 redundant, load-sharing, hot-swappable AC or -48V DC PSUs
- AC input range: 100-240 VAC; DC input range: -36 to -72 VDC
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- IPv4/IPv6 default & static routes, null routes, route preference & redistribution
- OSPF v2/v3 with graceful restart, passive, stub/NSSA, MD5 auth
- BGP4/BGP4+ with MD5 auth, graceful restart, unnumbered
- BFD for static routes, RIP, OSPFv2/v3, RIPng, iBGP
- VRRP, NAT, VRF
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: SP, WRR, SP+WRR, WFQ
- ETS (802.1Qaz), congestion control (WRED), bandwidth control
- Classification: MAC, IP, DSCP, protocol, L4 ports, IPv6 traffic class/flow label
- Policing, policy map, rate limiting
- Policy ACL: global/port/ingress/egress, SIP/DIP match, redirect/forward/drop actions
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH; config replace/reload
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote (7 severity levels), NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG, port breakout, management VRF, interface & drop counters
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
Certifications
Under Process
Under Process
Under Process
Under Process
25G · 100G
Allium DC207-MF
Overview
The MRO‑TEK Allium DC207-MF is a Top-of-Rack (TOR) switch for high-performance data centers, built on Marvell Falcon switch silicon. In a compact 1RU form factor, it provides line-rate L2/L3 switching across 48x SFP28 (25GbE) + 8x QSFP28 ports, each QSFP28 configurable as 4x25GbE, 1x40GbE, or 4x10GbE via DAC breakout cables. Deployable as a TOR switch supporting 10/25 GbE to servers with 40/100 GbE uplinks, for private or public cloud networks. Loaded with Open Network Install Environment (ONIE) for automated NOS installation.
48x SFP28 (25GbE) + 8x QSFP28 (25GbE)
Ports
2 Tbps
Switching Capacity
Marvell Falcon
Silicon
1RU
Form Factor
Specifications
- Switching capacity: 2 Tbps full duplex
- Layer 2 / Layer 3 line-rate switching
- Jumbo frame support
- Switch silicon: Marvell Falcon
- 1x USB 2.0
- 1x RJ-45 serial console
- 1x RJ-45 100/1000BASE-T management
- 2 redundant, load-sharing, hot-swappable AC or -48V DC PSUs
- AC input range: 100-240 VAC; DC input range: -36 to -72 VDC
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- IPv4/IPv6 default & static routes, null routes, route preference & redistribution
- OSPF v2/v3 with graceful restart, passive, stub/NSSA, MD5 auth
- BGP4/BGP4+ with MD5 auth, graceful restart, unnumbered
- BFD for static routes, RIP, OSPFv2/v3, RIPng, iBGP
- VRRP, NAT, VRF
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: SP, WRR, SP+WRR, WFQ
- ETS (802.1Qaz), congestion control (WRED), bandwidth control
- Classification: MAC, IP, DSCP, protocol, L4 ports, IPv6 traffic class/flow label
- Policing, policy map, rate limiting
- Policy ACL: global/port/ingress/egress, SIP/DIP match, redirect/forward/drop actions
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH; config replace/reload
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote (7 severity levels), NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG, port breakout, management VRF, interface & drop counters
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
- Switching capacity: 2 Tbps full duplex
- Layer 2 / Layer 3 line-rate switching
- Jumbo frame support
- Switch silicon: Marvell Falcon
- 1x USB 2.0
- 1x RJ-45 serial console
- 1x RJ-45 100/1000BASE-T management
- 2 redundant, load-sharing, hot-swappable AC or -48V DC PSUs
- AC input range: 100-240 VAC; DC input range: -36 to -72 VDC
- 5+1 redundant, hot-swappable fan modules
- Operating temperature: 0°C to 45°C
- Relative humidity: 5% to 95% (condensing)
- 802.3ad Link Aggregation (LACP)
- PVSTP
- Port mirroring
- VLAN mirroring
- 4K VLANs
- VLAN trunking
- 802.1Qbb Priority-based Flow Control (PFC)
- Multi-Chassis Link Aggregation (MC-LAG)
- VXLAN
- EVPN
- VRRP
- RoCE
- IP interfaces (IPv4/IPv6), loopback interfaces
- ARP (static/dynamic), IPv6 Neighbor Discovery (static/dynamic)
- IPv4/IPv6 default & static routes, null routes, route preference & redistribution
- OSPF v2/v3 with graceful restart, passive, stub/NSSA, MD5 auth
- BGP4/BGP4+ with MD5 auth, graceful restart, unnumbered
- BFD for static routes, RIP, OSPFv2/v3, RIPng, iBGP
- VRRP, NAT, VRF
- IPv4/IPv6 ACL match fields (src/dst mask, ToS, DSCP, protocol, TCP/UDP ports, VLAN/traffic class/flow label)
- 802.1p / DSCP / CoS mapping
- Scheduling: SP, WRR, SP+WRR, WFQ
- ETS (802.1Qaz), congestion control (WRED), bandwidth control
- Classification: MAC, IP, DSCP, protocol, L4 ports, IPv6 traffic class/flow label
- Policing, policy map, rate limiting
- Policy ACL: global/port/ingress/egress, SIP/DIP match, redirect/forward/drop actions
- ECN
- CLI, SNMP v1/v2c/v3 (IPv4/IPv6), SNMP traps
- Console, Telnet, SSH; config replace/reload
- Ping, Tracert; fan & power monitoring
- ZTP (Zero-Touch Provisioning)
- Syslog local/remote (7 severity levels), NTP, LLDP/LLDP-MED
- sFlow, REST API, YANG, port breakout, management VRF, interface & drop counters
- Optional: MAC dynamic learning, ECMP elastic hash, VXLAN Layer3 Gateway, SLA, Track, SPAN, gRPC
Certifications
Under Process
Under Process
Under Process
Under Process
Planning a data centre fabric or private cloud network?