FCAT-01 Series
Stand-alone Fast Ethernet media converter, single/multi-mode fibre.
Explore models
HOSTA-UG Series
Triple-speed Gigabit Ethernet media converter, single or dual-channel.
Explore models
OAK-13 Chassis
3U rack chassis platform for central office media converter deployments.
Explore models
CLOVER Series
Industrial-grade media converters rated -40°C to 85°C.
Explore models
Media Converters
FCAT-01 Series
FCAT-01 — stand-alone Fast Ethernet media converter, single/multi-mode fibre, built-in or external adapter power.
Fast Ethernet Conversion
Transparent 10/100BASE-T copper to 100BASE-FX fibre conversion, with auto MDI-I/MDI-X on the copper port.
Up to 100 km Reach
Single-mode fibre models from 15 to 100 km, or a 2 km multi-mode variant.
Built-in or Adapter Power
Choose built-in AC power or an external power adapter, depending on model.
Compact Standalone
156 x 154 x 43 mm desktop enclosure for point-to-point extension.
Media Converters
HOSTA-UG Series
HOSTA-UG — triple-speed Gigabit Ethernet media converter, single or dual-channel, single-mode fibre.
Triple-Speed Gigabit
10/100/1000BASE-T copper to 1000BASE-FX fibre, IEEE 802.3ab/802.3z compliant.
Single or Dual-Channel
One unit houses 1 or 2 independent conversion circuits, depending on model.
Up to 20 km Reach
Single-mode fibre models up to 20 km, plus a multi-mode fibre variant.
AC, DC, or Adapter Power
Built-in AC/DC input on dual-channel models, or a 9V external adapter on single-channel models.
Media Converters
OAK-13 Chassis
OAK-13 — 3U rack chassis media converter platform for central office and aggregation shelf deployments.
13-Slot Rack Chassis
Up to 26 independent Fast/Gigabit Ethernet media converter circuits in one 3U shelf.
Hot-Swappable Modules
Line cards insert and remove without powering down the chassis.
Redundant AC Power
Dual AC power supply modules for central-office uptime.
3U 19" Rack Mount
Built for central office and aggregation-shelf deployments.
Media Converters
CLOVER Series
CLOVER-01 and CLOVER-01G — industrial-grade media converters rated -40°C to 85°C, for factory, railway, and utility environments.
Extended Temp Range
Rated from -40°C (CLOVER-01) to 75°C+ (CLOVER-01G) for factory, railway, and utility environments.
DIN-Rail Mounting
Compact DIN-rail form factor for cabinet and panel installation at industrial sites.
Copper-to-Fibre Extension
Fast Ethernet (CLOVER-01) or Gigabit (CLOVER-01G) copper-to-fibre conversion, model dependent.
Rugged, Fanless Design
Fanless operation with no moving parts, built for continuous industrial duty.
CLOVER-01G
10/100/1000 Mbps · Single-mode up to 100 km (1550nm) · SFP / SC (optional)
Models
Up to 100km Reach
FCAT-01
Overview
FCAT-01 provides transparent, protocol-independent Fast Ethernet extension with automatic MDI-I/MDI-X sensing on the copper port, so no crossover cable or port-side configuration is needed. Ships with a built-in AC/DC power supply in three fixed SKUs spanning fibre reach — see Ordering Information. IEEE 802.3/802.3u compliant, fanless, and rated for 0°C to 50°C operation in a compact desktop enclosure.
10/100 Mbps
Speed
Single-mode 15/40/100 km
Fibre
SC
Connector
Built-in AC/DC
Power
Specifications
- 1× 10/100BASE-T port, shielded RJ-45, half/full duplex, Auto MDI-I/MDI-X
- 1× 100BASE-FX SC fibre port
- IEEE 802.3/802.3u compliant
- Single-mode, single-fibre (bidirectional WDM over one SC connector) — 15, 40, or 100 km depending on model
- SC connector
- Built-in power supply: AC 100-250V or -36 to -72V DC, 10W
- Dimensions: 156 × 154 × 43 mm
- Operating temp: 0°C to 50°C
- Humidity: 5% to 90%, non-condensing
- 1× 10/100BASE-T port, shielded RJ-45, half/full duplex, Auto MDI-I/MDI-X
- 1× 100BASE-FX SC fibre port
- IEEE 802.3/802.3u compliant
- Single-mode, single-fibre (bidirectional WDM over one SC connector) — 15, 40, or 100 km depending on model
- SC connector
- Built-in power supply: AC 100-250V or -36 to -72V DC, 10W
- Dimensions: 156 × 154 × 43 mm
- Operating temp: 0°C to 50°C
- Humidity: 5% to 90%, non-condensing
Ordering Information
- FCAT01/SA/SM15/SC/AC — single-mode single-fibre, 15 km, built-in AC power
- FCAT01/SA/SM40/SC/AC — single-mode single-fibre, 40 km, built-in AC power
- FCAT01/SA/SM100/SC/AC — single-mode single-fibre, 100 km, built-in AC power
FCAT-01/CAD
Overview
FCAT-01/CAD provides transparent, protocol-independent Fast Ethernet extension with automatic MDI-I/MDI-X sensing on the copper port, so no crossover cable or port-side configuration is needed. Powered by a compact external AC adapter instead of a built-in supply, in three fixed SKUs spanning fibre reach and type — see Ordering Information. IEEE 802.3/802.3u compliant, fanless, and rated for 0°C to 50°C operation.
10/100 Mbps
Speed
Single-mode 15/40 km or MM 2 km
Fibre
SC
Connector
External AC adapter
Power
Specifications
- 1× 10/100BASE-T port, shielded RJ-45, half/full duplex, Auto MDI-I/MDI-X
- 1× 100BASE-FX SC fibre port
- IEEE 802.3/802.3u compliant
- Single-mode fibre — 15 or 40 km depending on model
- Multi-mode fibre — 2 km (FCAT01/SA/MM2/SC/CAD)
- SC connector
- External power adapter: 9V, 1A
- Dimensions: 50 × 79 × 25 mm
- Operating temp: 0°C to 50°C
- Humidity: 5% to 90%, non-condensing
- 1× 10/100BASE-T port, shielded RJ-45, half/full duplex, Auto MDI-I/MDI-X
- 1× 100BASE-FX SC fibre port
- IEEE 802.3/802.3u compliant
- Single-mode fibre — 15 or 40 km depending on model
- Multi-mode fibre — 2 km (FCAT01/SA/MM2/SC/CAD)
- SC connector
- External power adapter: 9V, 1A
- Dimensions: 50 × 79 × 25 mm
- Operating temp: 0°C to 50°C
- Humidity: 5% to 90%, non-condensing
Ordering Information
- FCAT01/SA/SM15/SC/CAD — single-mode 15 km, external AC adapter
- FCAT01/SA/SM40/SC/CAD — single-mode 40 km, external AC adapter
- FCAT01/SA/MM2/SC/CAD — multi-mode 2 km, external AC adapter
HOSTA-UG-R
Overview
HOSTA-UG-R is a single-channel triple-speed Gigabit Ethernet media converter, converting 10/100/1000BASE-T copper to 1000BASE-FX fibre over a single conversion circuit. A DIP switch enables or disables Link Fault Passthrough, auto-negotiation, and port speed without a management console. Available with AC or DC power input depending on order code.
10/100/1000 Mbps
Speed
Single-mode, up to 20 km
Fibre
SC
Connector
AC / DC
Power
Specifications
- 1× 10/100/1000BASE-T RJ-45 copper port, full duplex, Auto MDI-I/MDI-X
- 1× 1000BASE-X SC fibre port
- Single-channel stand-alone media conversion
- IEEE 802.3ab, IEEE 802.3z standard compliance
- DIP switch — enable/disable LFP, auto-negotiation, and speed
- Single-mode fibre — 15 or 20 km, order-code dependent
- 1310nm wavelength, 9/125 single-mode fibre
- SC connector
- PWR LED — power status
- Fx LED — green, blinking for fibre port link/activity
- Cu LED — green, blinking for copper port link/activity
- AC 90-260VAC or DC -36V to -60V, order-code dependent
- Operating temp: 0°C to 55°C
- Humidity: 10% to 90%, non-condensing
- 1× 10/100/1000BASE-T RJ-45 copper port, full duplex, Auto MDI-I/MDI-X
- 1× 1000BASE-X SC fibre port
- Single-channel stand-alone media conversion
- IEEE 802.3ab, IEEE 802.3z standard compliance
- DIP switch — enable/disable LFP, auto-negotiation, and speed
- Single-mode fibre — 15 or 20 km, order-code dependent
- 1310nm wavelength, 9/125 single-mode fibre
- SC connector
- PWR LED — power status
- Fx LED — green, blinking for fibre port link/activity
- Cu LED — green, blinking for copper port link/activity
- AC 90-260VAC or DC -36V to -60V, order-code dependent
- Operating temp: 0°C to 55°C
- Humidity: 10% to 90%, non-condensing
Ordering Information
- HOSTA-UG-R/SM15/SC — single-mode, 15 km, AC power
- HOSTA-UG(V5)/SC/SM20/AC — single-mode, 20 km, AC power
- HOSTA-UG(V5)/SC/SM20/DC — single-mode, 20 km, DC power
HOSTA-UG/CAD
Overview
HOSTA-UG/CAD is a compact, stand-alone single-channel Gigabit Ethernet media converter, converting 10/100/1000BASE-T copper to 1000BASE-FX fibre in a palm-sized enclosure powered by an external AC adapter. Supports jumbo frames up to 10K, and per-port diagnostic LEDs simplify field troubleshooting.
10/100/1000 Mbps
Speed
Single-mode 15 km, or multi-mode
Fibre
SC
Connector
External AC adapter
Power
Specifications
- 1× 10/100/1000BASE-T RJ-45 copper port, full duplex, Auto MDI-I/MDI-X
- 1× 1000BASE-X SC fibre port
- Single-channel stand-alone media conversion
- Supports jumbo frames up to 10K
- IEEE 802.3ab, IEEE 802.3z standard compliance
- DIP switch — enable/disable LFP, auto-negotiation, speed, and jumbo frames
- Single-mode fibre — 15 km, or multi-mode fibre option
- SC connector
- PWR LED — power status
- Fx LED — green, blinking for fibre port link/activity
- Cu LED — green, blinking for copper port link/activity
- 9V/0.5A external AC-DC adapter, ~4W typical
- Dimensions: 50 × 79 × 25 mm, ~170g with adapter
- Operating temp: 0°C to 55°C
- Humidity: 10% to 90%, non-condensing
- 1× 10/100/1000BASE-T RJ-45 copper port, full duplex, Auto MDI-I/MDI-X
- 1× 1000BASE-X SC fibre port
- Single-channel stand-alone media conversion
- Supports jumbo frames up to 10K
- IEEE 802.3ab, IEEE 802.3z standard compliance
- DIP switch — enable/disable LFP, auto-negotiation, speed, and jumbo frames
- Single-mode fibre — 15 km, or multi-mode fibre option
- SC connector
- PWR LED — power status
- Fx LED — green, blinking for fibre port link/activity
- Cu LED — green, blinking for copper port link/activity
- 9V/0.5A external AC-DC adapter, ~4W typical
- Dimensions: 50 × 79 × 25 mm, ~170g with adapter
- Operating temp: 0°C to 55°C
- Humidity: 10% to 90%, non-condensing
Ordering Information
- HOSTA-UG/CAD/SM15/SC — single-mode, 15 km, external AC adapter
- HOSTA-UG/CAD/MM/SC — multi-mode fibre, external AC adapter
OAK-13
Overview
OAK-13 line modules are hot-swappable, so cards can be inserted or removed without powering down the chassis or disrupting the other circuits it carries. Gigabit Ethernet line cards report Far End Fault and Link Fault Propagation status per port, and each card carries its own link/activity LEDs for field diagnostics. Alongside redundant AC, a -36V to -72V DC power option is available for central-office environments, with maximum consumption of 65W across a fully populated chassis.
Up to 13
Slots
Up to 26
Circuits
3U 19" rack
Form Factor
Redundant AC
Power
Specifications
- 3U, 19-inch rack-mountable chassis
- Up to 13 line module slots, up to 26 independent media converter circuits
- Hot-swappable line modules
- Supports Fast Ethernet and Gigabit Ethernet media converter modules (unmanaged)
- Multi-mode fibre — up to 2 km (module dependent)
- Single-mode fibre — 15 km (FE) or 15/25/40 km (GE), module dependent
- GE modules available as single-fibre (SF, bidirectional WDM) or dual-fibre (SM) variants
- SC fibre connectors on line modules
- Power supply status LED
- Per-port link status/activity LEDs on each line card
- FEF (Far End Fault) and LFP (Link Fault Propagation) indications on GE line cards
- Redundant AC power supply modules — 100-250 VAC, 50/60Hz
- DC option: -36V to -72V
- Max power consumption: 65W
- Humidity: 10% to 90%, non-condensing
- 3U, 19-inch rack-mountable chassis
- Up to 13 line module slots, up to 26 independent media converter circuits
- Hot-swappable line modules
- Supports Fast Ethernet and Gigabit Ethernet media converter modules (unmanaged)
- Multi-mode fibre — up to 2 km (module dependent)
- Single-mode fibre — 15 km (FE) or 15/25/40 km (GE), module dependent
- GE modules available as single-fibre (SF, bidirectional WDM) or dual-fibre (SM) variants
- SC fibre connectors on line modules
- Power supply status LED
- Per-port link status/activity LEDs on each line card
- FEF (Far End Fault) and LFP (Link Fault Propagation) indications on GE line cards
- Redundant AC power supply modules — 100-250 VAC, 50/60Hz
- DC option: -36V to -72V
- Max power consumption: 65W
- Humidity: 10% to 90%, non-condensing
Ordering Information
- OAK-13/ACR — bare 13-slot chassis with redundant AC power supply module
- OAK-13/2FE/SM15/SC — dual-channel Fast Ethernet line module, single-mode dual-fibre, 15 km
- OAK-13/2GE/SF40/SC — dual-channel Gigabit Ethernet line module, single-mode single-fibre, 40 km
- OAK-13/2GE/SF15/SC — dual-channel Gigabit Ethernet line module, single-mode single-fibre, 15 km
- OAK-13/2GE/SM25/SC — dual-channel Gigabit Ethernet line module, single-mode dual-fibre, 25 km
CLOVER-01
Overview
CLOVER-01 carries a dual DC power input for supply-side redundancy, with an alarm dry-relay contact that can trigger an external annunciator or SCADA input on link or power failure. A 6-pole DIP switch handles mode configuration in the field, and dedicated LEDs report power, alarm, and fibre/copper link status independently for fast fault isolation in unattended cabinets.
10/100 Mbps
Speed
Single-mode 15 km
Fibre
SC
Connector
-40°C to 85°C
Operating Temp
Specifications
- 1x 10/100BASE-T copper port, RJ-45
- 1x 100BASE-FX fibre port (fixed SC or pluggable module)
- 6-pole DIP switch for mode configuration
- Alarm dry relay contact
- Single-mode fibre, 15 km reach
- SC connector
- Power LEDs: PWR-1, PWR-2 (green)
- Alarm LED: alarm indication (red)
- FX-LNK and FX-ACT LEDs (green) for the fibre port
- SPD LED: 100BaseT/10BaseT link/activity (green, copper port only)
- Dual DC power supply (redundant), 12V-60V DC — or external AC-DC adapter, AC 100-240V 50/60Hz input, 48V/24V DC output
- Operating temperature: -40°C to 85°C
- Operating humidity: 5% to 95%, non-condensing
- Storage temperature: -40°C to 85°C
- Storage humidity: 5% to 95%, non-condensing
- 1x 10/100BASE-T copper port, RJ-45
- 1x 100BASE-FX fibre port (fixed SC or pluggable module)
- 6-pole DIP switch for mode configuration
- Alarm dry relay contact
- Single-mode fibre, 15 km reach
- SC connector
- Power LEDs: PWR-1, PWR-2 (green)
- Alarm LED: alarm indication (red)
- FX-LNK and FX-ACT LEDs (green) for the fibre port
- SPD LED: 100BaseT/10BaseT link/activity (green, copper port only)
- Dual DC power supply (redundant), 12V-60V DC — or external AC-DC adapter, AC 100-240V 50/60Hz input, 48V/24V DC output
- Operating temperature: -40°C to 85°C
- Operating humidity: 5% to 95%, non-condensing
- Storage temperature: -40°C to 85°C
- Storage humidity: 5% to 95%, non-condensing
CLOVER-01G
Overview
CLOVER-01G uses a pluggable fibre port, so the same unit can be re-optioned for 20 to 100 km reach by swapping the fibre transceiver module rather than the converter itself. Link Fault Passthrough propagates a fibre-side failure to the copper port for accurate upstream fault detection, and the unit draws under 3W on its own 48VDC input ahead of its PoE/PoE+ output to the connected device.
10/100/1000 Mbps
Speed
Single-mode up to 100 km (1550nm)
Fibre
SFP / SC (optional)
Connector
PoE/PoE+ 30W
Power Output
Specifications
- 1x 10/100/1000BASE-T RJ-45 copper port (PoE/PoE+ capable, 30W)
- 1x 1000BASE-X fibre port
- IEEE 802.3, 802.3u, 802.3z; flow control IEEE 802.3x, back pressure control
- Multi-mode: 1310nm, 2 km
- Single-mode: 1310nm (20/40/60 km); 1550nm (20/40/60/80/100 km)
- SFP and SC connectors are optional
- 48VDC input (12-48V range), <3W consumption; PoE/PoE+ output 30W
- DIN-rail installation
- Operating temp: -20°C to 75°C — industrial rated
- Storage temp: -40°C to 85°C
- Humidity: 10% to 95%, non-condensing
- Link Fault Passthrough (LFP) support
- 1x 10/100/1000BASE-T RJ-45 copper port (PoE/PoE+ capable, 30W)
- 1x 1000BASE-X fibre port
- IEEE 802.3, 802.3u, 802.3z; flow control IEEE 802.3x, back pressure control
- Multi-mode: 1310nm, 2 km
- Single-mode: 1310nm (20/40/60 km); 1550nm (20/40/60/80/100 km)
- SFP and SC connectors are optional
- 48VDC input (12-48V range), <3W consumption; PoE/PoE+ output 30W
- DIN-rail installation
- Operating temp: -20°C to 75°C — industrial rated
- Storage temp: -40°C to 85°C
- Humidity: 10% to 95%, non-condensing
- Link Fault Passthrough (LFP) support
Need to extend your network over fibre?